IBM®
Skip to main content
    Country/region change    Terms of use
 
 
 
    Home    Products    Services & solutions    Support & downloads    My account    
IBM Research

Carbon Nanotube Transistors

Fact sheet


 


Constructive destruction
Depending on their size and shape, the electronic properties of carbon nanotubes can be metallic or semiconducting. The problem scientists had faced in using carbon nanotubes as transistors was that all synthetic methods of production yield a mixture of metallic and semiconducting nanotubes which “stick together” to form ropes or bundles. This compromises their usefulness because only semiconducting nanotubes can be used as transistors; and when they are stuck together, the metallic nanotubes overpower the semiconducting nanotubes. IBM scientists have pioneered a method called constructive destruction that allows them to destroy all the metallic nanotubes and leave the semiconducting nanotubes unharmed. Here are the steps:
  1. The scientists deposit ropes of “stuck together” metallic and semiconducting nanotubes on a silicon-oxide wafer,
  2. Then a lithographic mask is projected onto the wafer to form electrodes (metal pads) over the nanotubes. These electrodes act as a switch to turn the semiconducting nanotubes on and off,
  3. Using the silicon wafer itself as an electrode, the scientists "switch-off" the semiconducting nanotubes, which essentially blocks any current from traveling through them,
  4. The metal nanotubes are left unprotected and an appropriate voltage is applied to the wafer, destroying only the metallic nanotubes, since the semiconducting nanotubes are now insulated,
  5. The result: a dense array of unharmed, working semiconducting nanotube transistors that can be used to build logic circuits like those found in computer chips.


Carbon nanotube: Building transistors #1Constructive Destruction -- Building Carbon Nanotube Transistors
More picture options ]   [ Get permission to re-use ]


Selective Breakdown
IBM scientists can control the electricity flowing into a multi-walled carbon nanotube and break down the outer shells one-by-one. Using this selective breakdown technique, the scientists can control the size of the carbon nanotube, which allows them to build nanotubes with the electrical properties they want to build useful electronic devices.

Carbon nanotube: Building transistors #2Selective Breakdown of a Multi-walled Carbon Nanotube
More picture options ]   [ Get permission to re-use ]


Combination of the above two pictures



Constrauctive Destruction
Note: Click on an image (below) to download larger version


See also:
  ·  2001-04-25: Chip Evolution: IBM Scientists Develop Breakthrough Transistor Technology with Carbon Nanotubes


    About IBMPrivacyContact