This report describes the instrumentation developed for the dynamic measurement of power and temperature for the Apple Power Mac G5. The G5 employs one or two 64-bit PowerPC 970 processors and runs Mac OS X, and 32-bit or 64-bit Linux. Apple has implemented a set of temperature, power and fan RPM sensors. OS X uses the sensors for fan speed control, in order to minimize the acoustic disturbance of a deskside system. The following metrics are obtained.
• Fans rpm
• Fans outlet temperatures
• Voltage to each 970 processor
• Current to each 970 processor
• Temperature of each 970 processor
Note: This report describes the first revision of the dual-processor 2.0 GHz Power Mac G5. By the time you read this, a newer liquid-cooled dual-processor 2.5 GHz model will be available.
By: Wes Felter, Tom Keller
Published in: RC23276 in 2004
LIMITED DISTRIBUTION NOTICE:
This Research Report is available. This report has been submitted for publication outside of IBM and will probably be copyrighted if accepted for publication. It has been issued as a Research Report for early dissemination of its contents. In view of the transfer of copyright to the outside publisher, its distribution outside of IBM prior to publication should be limited to peer communications and specific requests. After outside publication, requests should be filled only by reprints or legally obtained copies of the article (e.g., payment of royalties). I have read and understand this notice and am a member of the scientific community outside or inside of IBM seeking a single copy only.
Questions about this service can be mailed to firstname.lastname@example.org .