 2007 | The material allocation problem in the steel industry |
| 2005 | Mixing, rheology, and stability of highly filled thermal pastes |
| 2002 | Process requirements for continued scaling of CMOS—the need and prospects for atomic-level manipulation |
| 2002 | Vertically scaled MOSFET gate stacks and junctions: How far are we likely to go? |
| 2001 | Strain measurement and numerical analysis of an epoxy adhesive subjected to thermal loads |
| 2000 | Medium-energy ion scattering for analysis of microelectronic materials |
| 2000 | Scanning tunneling microscopy |
| 2000 | X-ray spectro-microscopy of complex materials and surfaces |
| 1999 | Growth and characterization of ultrathin nitrided silicon oxide films |
| 1999 | Scaling the gate dielectric: Materials, integration, and reliability |
| 1999 | Ultrathin nitrided gate dielectrics: Plasma processing, chemical characterization, performance, and reliability |
| 1998 | Magnetotransport in doped manganate perovskites |
| 1989 | Effects of quasiperiodic (Penrose tile) symmetry on the eigenvalues and eigenfunctions of the wave equation |
| 1988 | Characterization of a bis-maleimide triazine resin for multilayer printed circuit boards |
| 1988 | Characterization of PdSn catalysts for electroless metal deposition |
| 1988 | Chemistry at interfaces: Electropositive metals on polymer surfaces |
| 1988 | Delocalized bonding at the metal–polymer interface |
| 1988 | Developer-induced debonding of photoresist from copper |
| 1988 | Elastic and viscoelastic behavior of a magnetic recording tape |
| 1988 | Improvement of adhesion of copper on polyimide by reactive ion-beam etching |
| 1988 | Ion transport through protective polymeric coatings exposed to an aqueous phase |
| 1988 | Surface analysis and characterization of large printed-circuit-board circuitization process steps |
| 1988 | The kinetics of fast steps on crystal surfaces and its application to the molecular beam epitaxy of silicon |
| 1986 | Application to biology and technology of the scanning tunneling microscope operated in air at ambient pressure |
| 1986 | Applications of a high-stability scanning tunneling microscope |
| 1986 | Chemical applications of scanning tunneling microscopy |
| 1986 | Computer automation for scanning tunneling microscopy |
| 1986 | Construction of a UHV scanning tunneling microscope |
| 1986 | Mono-atomic tips for scanning tunneling microscopy |
| 1986 | Near-field optical scanning microscopy with tunnel-distance regulation |
| 1986 | Scanning tunneling microscope automation |
| 1986 | Scanning tunneling microscopy of cleaved semiconductor surfaces |
| 1986 | Scanning tunneling microscopy of surface microstructure on rough surfaces |
| 1986 | Scanning tunneling microscopy |
| 1986 | STM activity at the University of Basel |
| 1986 | Surface modification with the scanning tunneling microscope |
| 1986 | Wide-range, low-operating-voltage, bimorph STM: Application as potentiometer |
| 1985 | A dielectric loss investigation of moisture in epoxy-glass composites |
| 1985 | Cathodic delamination of methyl methacrylate-based dry film polymers on copper |
| 1985 | Electrical properties of resistive ribbon |
| 1985 | Implementation of the resistive ribbon technology in a printer and correcting typewriter |
| 1985 | Ink temperatures in resistive ribbon thermal transfer printing |
| 1985 | Resistive ribbon thermal transfer printing: A historical review and introduction to a new printing technology |
| 1985 | The stability of a colloidal suspension of coated magnetic particles in an aqueous solution |
| 1985 | Thermal behavior of resistive ribbon for single-stylus excitation |
| 1984 | Bending-cantilever method for the study of moisture swelling in polymers |
| 1984 | High-temperature stability of a polyimide film |
| 1984 | Initiation of electroless Cu plating on nonmetallic surfaces |
| 1984 | Mechanisms of electroless metal plating: II. Decomposition of formaldehyde |
| 1984 | Mechanisms of electroless metal plating: I. Mixed potential theory and the interdependence of partial reactions |
| 1984 | Microstructure evolution during electroless copper deposition |
| 1984 | Moisture solubility and diffusion in epoxy and epoxy-glass composites |
| 1984 | Paper Material Considerations for System Printers |
| 1984 | Preface: Advances in materials and processes for printed circuit packaging technology |
| 1983 | Digital Simulation of Magnetic Czochralski Flow Under Various Laboratory Conditions for Silicon Growth |
| 1983 | Mechanical Properties of Electrochemically Prepared Polypyrrole Films |
| 1982 | A New Class of Materials for Holography in the Infrared |
| 1982 | A New Set of Printed-Circuit Technologies for the IBM 3081 Processor Unit |
| 1982 | A VLSI Bipolar Metallization Design with Three-Level Wiring and Area Array Solder Connections |
| 1982 | Cost/Performance Single-Chip Module |
| 1982 | Optimization of Indium-Lead Alloys for Controlled Collapse Chip Connection Application |
| 1982 | Oxygen Incorporation and Precipitation in Czochralski-Grown Silicon |
| 1982 | Process Control of the Chlorobenzene Single-Step Liftoff Process with a Diazo-Type Resist |
| 1982 | The Mechanism of Single-Step Liftoff with Chlorobenzene in a Diazo-Type Resist |
| 1981 | Conducting Polymers: A Review of Recent Work |
| 1981 | Electronic Packaging Evolution in IBM |
| 1981 | Phase Transitions |
| 1981 | Pi-Donor Intercalate Polymers: Synthesis, Charge-Transfer Interactions, and Applications |
| 1981 | Semiconductors at IBM: Physics, Novel Devices, and Materials Science |
| 1981 | [Pt]Polypyrrole: A New Organic Electrode Material |
| 1980 | An Overview of Josephson Packaging |
| 1980 | An Overview of Materials and Process Aspects of Josephson Integrated Circuit Fabrication |
| 1980 | Electron-Beam Resists for Lift-Off Processing with Potential Application to Josephson Integrated Circuits |
| 1979 | Annealing of Poly(ethylene terephthalate)-Film-Based Magnetic Recording Media for Improved Dimensional Stability |
| 1979 | Cathodes for HeNe Lasers |
| 1979 | Encapsulation of Radioactive Noble Gas Waste in Amorphous Alloy |
| 1979 | Experimental Determination of Creep Functions for Thin Orthotropic Polymer Films |
| 1979 | Laminated Films with Isotropic In-Plane Properties |
| 1979 | Solar-Grade Silicon by Directional Solidification in Carbon Crucibles |
| 1979 | Thermal Stress in Bonded Joints |
| 1978 | Al-Cu Alloy for Gas Panels |
| 1978 | Characterization of Electron Traps in Aluminum-Implanted SiO2 |
| 1978 | Electronic Properties of (100) Surfaces of GaSb and InAs and Their Alloys with GaAs |
| 1978 | Electroplated Diamond-Composite Coatings for Abrasive Wear Resistance |
| 1978 | Growth of Polycrystalline GaAs for Solar Cell Applications |
| 1978 | Light Scattering Study of Structures in a Smectic Liquid Crystal |
| 1978 | Location of Trapped Charge in Aluminum-Implanted SiO2 |
| 1978 | Low Cost Silicon for Solar Energy Conversion Applications |
| 1978 | Model Study in Chemisorption: Molecular Orbital Cluster Theory for Atomic Hydrogen on Be(0001) |
| 1978 | Molecular Geometries of Acetylene and Ethylene Chemisorbed On Cu, Ni, Pd, and Pt Surfaces |
| 1978 | Novel Materials and Devices for Sunlight Concentrating Systems |
| 1978 | Organic Photovoltaic Materials: Squarylium and Cyanine-TCNQ Dyes |
| 1978 | Oriented Epitaxial Films of (NMP) (TCNQ) |
| 1978 | Phase Equilibria in Liquid Crystal Mixtures |
| 1978 | Reaction of Atomic Hydrogen with Si(111) Surfaces: Formation of Monohydride and Trihydride Phases |
| 1978 | Regression Model for LPE Film Property Control |
| 1978 | Solar Absorbing Surfaces of Anodized Dendritic Tungsten |
| 1978 | Sputter Profiling Through Ni/Fe Interfaces by Auger Electron Spectroscopy |
| 1978 | Work-hardening of Ferrite Head Surfaces by Wear with Flexible Recording Media |
| 1978 | X-Ray Photoelectron Spectroscopy of SiO2–Si Interfacial Regions: Ultrathin Oxide Films |
| 1977 | Conduction Studies in Silicon Nitride: Dark Currents and Photocurrents |
| 1977 | Control of Magnetic Properties During the Processing of Single Crystal Garnet Films |
| 1977 | Development and Characterization of Ink for an Electrostatic Ink Jet Printer |
| 1977 | Effect of Substrate Bias on Properties of RF-Sputtered Cr–SiO Films |
| 1977 | Materials Selection for an Ink Jet Printer |
| 1977 | Model for the Kinematics of Polymer Dissolution |
| 1977 | NMR Study of the Chain Microstructure of P(MMA-co-MAA) |
| 1977 | Origin and Effects of Negative Ions in the Sputtering of Intermetallic Compounds |
| 1977 | Parameters Affecting the Electron Beam Sensitivity of Poly(methyl methacrylate) |
| 1977 | Preparation and Properties of (SN)x |
| 1977 | Properties of Polymeric Thin Films by Integrated Optical Techniques |
| 1977 | Radiation Chemistry of Poly(methacrylates) |
| 1977 | Rheology and Modeling of the Spin Coating Process |
| 1977 | Solubility and Diffusion of Sulfur in Polymeric Materials |
| 1977 | Strength and Related Properties of Elastomeric Block Copolymers |
| 1977 | Thermal Analysis of Positive Photoresist Films by Mass Spectrometry |
| 1977 | Thermal Effects on the Photoresist AZ1350J |
| 1976 | Dependence of Ink Jet Dynamics on Fluid Characteristics |
| 1976 | Structure and Magnetic Anisotropy of Amorphous Gd–Co Films |
| 1976 | Submicrometer Stripes and Bubbles in Amorphous Films |
| 1975 | Ferromagnetism in Bi- and Te-substituted MnRh |
| 1975 | On Dislocations in GaAs1−xPx |
| 1974 | Ferrite Film Recording Surfaces for Disk Recording |
| 1974 | Interatomic Potentials and Defect Energetics in Dilute Alloys |
| 1974 | Preparation of Large-area Electron-transparent Samples from Silicon Devices |
| 1974 | Stress Analysis of Glass-Bonded Ferrite Recording Heads |
| 1974 | Water Vapor as an Oxidant in BBr3 Open-tube Silicon Diffusion Systems |
| 1973 | Amorphous Metallic Films for Bubble Domain Applications |
| 1973 | An AlN Switchable Memory Resistor Capable of a 20-MHz Cycling Rate and 500-picosecond Switching Time |
| 1973 | Dislocations in Gadolinium Gallium Garnet (Gd3Ga5O12): III. Nature of Prismatic Loops and Helical Dislocations |
| 1972 | Design and Fabrication of Heat Transfer Surfaces from Superplastic Material |
| 1972 | Detection of Discontinuities in Passivating Layers on Silicon by NaOH Anisotropic Etch |
| 1972 | Development of Water-soluble Systems for Use in Industrial Soldering Processes |
| 1972 | Ge Epitaxial Refill Deposition Techniques for Fabricating Pedestal Transistor Structures |
| 1972 | Mechanics of Film Adhesion: Elastic and Elastic-Plastic Behavior |
| 1972 | Removal of Numerical Instability in the Solution of Nonlinear Heat Exchange Equations |
| 1972 | Sputter-etching of Heterogeneous Surfaces |
| 1972 | Theories of the Distribution of Deposit from Sputtered Disk and Rectangular Electrodes |
| 1972 | Viscoelastic Behavior of Computer Tape Subjected to Periodic Motion |
| 1971 | A Design Study of Ultrasonic Bonding Tips |
| 1971 | A New High-sensitivity Organic Photoconductor for Electrophotography |
| 1971 | Adhesion and Partial Slip between Normally Loaded Round Surfaces |
| 1971 | Analysis of Defect Distribution in Transistor Structures with Reflection and Transmission X-Ray Topography |
| 1971 | Effect of Extremely Thin Nitrogenous Surface Films on Phosphorus-impurity Profiles in Silicon |
| 1971 | Effect of Hammer Length and Nonlinear Paper-ribbon Characteristics on Impact Printing |
| 1971 | Heat-transfer Calculations at the Tape-head Interface of a Computer Tape Drive |
| 1971 | Molecular Engineering in the Development of Materials for Thermoplastic Recording |
| 1971 | On the Correlation between Domain Size and Coercive Force in Grain-oriented 3.25% Si–Fe |
| 1971 | Wear of Electrical Contacts due to Small-amplitude Motion |
| 1962 | Fluorescence of Europium Tungstate |
| 1958 | Study of the Second-Order Ferroelectric Transition in Tri-Glycine Sulfate |
